Leaks test all connections once the conversion process has been completed.ġ6. Next, disconnect your manometer from the unit and reinstall the 1/8” test port plug. Reconfirm all pressure settings before putting said unitīack into operation. The LED display turns blank and the unit returns to the normal OFF mode.ġ5. Press the Economy button to enter the high fire pressure Requirements of the manufacturer, provincial or territorial authorities having jurisdiction and in accordance with the requirements of the CAN/CGA-B149.1 or CAN/CGA-B149.2 Installation Codes.Ĭonfirm differential pressure for which gas unit is converted to:ģ. The conversion shall be carried out by a manufacturer’s authorized representative in accordance with the SEE STEP 12 FOR LOW FIRE PRESSURE AND STEP 15 FOR HIGH FIRE PRESSURE.ġ. ALSO, IF THE LOW CONTROL PRESSURE CANNOT BE OBTAINED IN STEP 12, ADJUST THE ADJUSTMENT SCREW ON THE PROPORTIONAL VALVE TO ROUGHLY SET PRESSURE AND THEN RECHECK BOTH THE LOW AND HIGH FIRE PRESSURES. IF THE PRESSURE IS INCORRECT, CHECK THE SUPPLY PRESSURE FIRST, BEFORE MAKING ANY ADJUSTMENTS TO THE APPLIANCE. NOTE: THE REGULATOR HAS BEEN FACTORY PRE-SET.
0 kommentar(er)
